Windows 8 / 8.1 Wireless Configuration
Follow the steps below to connect to the WheatonCollege wireless network. Note: The instructions below assume you’re using the Windows 8 / 8.1 Wireless Utility. If you’re using the utility provided by the network card manufacturer, follow their instructions for wireless network configuration. Use the following information:

Network Name: WheatonCollege

Authentication Type: WPA2-PSK

Encryption Type: AES

Network/Encryption Key: wheatoncollege

Windows 8 / 8.1 Wireless Configuration Instructions

  1. Open the Windows Wireless Network Configuration utility by double-clicking on the icon in the Notification tray located in the bottom right hand corner.

    -
  2. Select WheatonCollege from the list of networks and click Connect.

    -
  3. Enter in wheatoncollege for the network security key and click Next.

    -
  4. Click on No.

    -
  5. It should now say connected under the WheatonCollege Network.

    -



Windows 7 Wireless Configuration
Follow the steps below to connect to the WheatonCollege wireless network. Note: The instructions below assume you’re using the Windows 7 Wireless Utility. If you’re using the utility provided by the network card manufacturer, follow their instructions for wireless network configuration. Use the following information:

Network Name: WheatonCollege

Authentication Type: WPA2-PSK

Encryption Type: AES

Network/Encryption Key: wheatoncollege

Windows 7 Wireless Configuration Instructions

1. Open the Windows Wireless Network Configuration utility by double-clicking on the icon in the Notification Tray.

-

2. Select WheatonCollege from the list of networks and click Connect.

-

3. Enter in wheatoncollege for the network security key and click OK.

-

4. Once it has connected you’ll see the notification tray icon change.

-